GyroBot is the only system using three acceleration sensors in addition to 3 MEMS gyro sensors of best quality. It recognizes much more movements during flight and process data faster. That means for you: Perfect flight characteristics with very easy set up and tunning
GyroBot 900 with USB
|
|
|
The GyroBot 900 is the best quality and most precise controller and stabilizer for the cyclic and rudder.
It allows you to fly your helicopter with a 'rigid' rotor head, you no longer need a flybar and a tail gyro (Still you can use a Flybar in Beginner- and Beginner Acro Mode)! All electronics are contained in one small housing (32x32x16 mm). You have more power and longer flight time.
Overview
The System can be used in three modes:
1. Standard Mode
This Mode is a very precise control for flybarless helicopters. The heli flies like a flybar helicopter, but more power, responsiveness and stability; bsolutely neutral flying characteristics for beginners, perfect FAI, extreme 3D or very stable and precise Scale flying for 2 and multi blade rotorheads. Each multi blade head or 2 blade head flies “like on rails” with very easy set up and tuning.
2. Beginner Mode
In this mode there is an active cyclic control for the aileron and elevator axis. The self-levels on center cyclic stick. The maximum deflection can be adjusted from 10 to 50 degrees, so the model does not tilt more than this angle. Perfect learning tool for hovering in all orientations. The Beginnermode can be overridden from you (adjustable), so you can progressively improve your hovering skill. The Beginnermode works with or without flybar.
3. Beginner Acro Mode
This mode offers added to the features of the Beginnermode the possibility of easy learning rolls, flips, loops and inverted flying. Active cyclic control auto-levels your heli in upright or inverted with cyclic stick centered. Beginner Acro Mode works with or without flybar. The GyroBot is the only system with this perfect 3D practicing tool.
Technical details:
-CNC aluminum case; bright chrome finishing
-Size: 32x32x16 mm
-Weight: 20 g
-Sensor : 3 MEMS gyro sensors of best quality, with three acceleration sensors
-RISC processor
-Voltage range: 3,0V – 12 V
-For all class of helicopter with all different power source
-Optimized functions for Multi blade Rotorheads
-Phase timing
-Pirouette Optimization
-The system can always be upgrade without loosing your existing settings
-You can switch between 3 different flight settings via a spare channel
-Very easy set up and tuning
-Compatible to all PPM, PCM, and 2,4 GHz RC Systems
-Made in Germany
Useful info link
Leap's going flybarless... GyroBot configuration - So, first up is the GyroBot configuration. ... The GyroBot will always navigate the helicopter back into the horizontal as soon as you loose the sticks. ...
Gyrobot Information and Configuration Thread - Pilots comment and discussion on HeliFreak ... very informative link ...